...want to over tighten it because they can break off. If it seems to be tight, then remove the sending unit and put some Teflon tape on the threads and reinstall. This will stop the oil from
Question about Nissan Sentra
...changed value cover gasket seams to be coming out behind alternator.or lower. Look for oil pressure sending unit. sometimes located on the side of the engine nearest the firewall. real pain to get
...oil pressure sending unit. If it hasn't been in for an oil change lately, take it in, mention you have seen drops on the driveway, the tech will likely note the leak and possible solution. From this ...
Question about Nissan Sentra
...rear seals,2; valve seals or gasket 3, oil pan gasket 4,oil pump seal 5,oil pressure sensor sending unit . have your engine cleaned and use oil with dye to pinpoint exactly where leak is coming ...
...oil pressure sending unit wire. It will leak into the electrical connector. Squeeze it and see if oil seeps out. If so replace the sending unit. It looks kind of like a spark plug screwed into the ...
...oil leaking near sending unit. Replaced uni... Engine oil leaking near sending unit. Replaced unit and oil still leaks. What could be the cause? Look up overhead above the sending unit for any oil ...
Question about Nissan Sentra
...oil sending unit 99 deville northstar? leaking oil leaking oil...lots from the frount side on the motor...oil sending unit? where is it located? oil sending unit on the 4.6L engine located on the oil ...
...oil sending unit, what I wanted to know is where the sending unit on the car is because the oil is leaking from the front passenger side of the motor.. The oil pressure sending unit screws into the ...
Question about Nissan Sentra
...Oil Sending Unit is burnt or bad? Yes the sending unit will leak oil if it's bad. It will leak where the electrical plug clicks into the unit. If you disconnect the plug and remove the unit, you can ...
...oil sending unit possiblely be the cause for an oil leak Yes it certainly can. Because oil has to pass into the sending unit under pressure in order to work. If the sending unit develops an internal ...
499 questions posted
Usually answered in minutes!
798 Questions
708 Questions
716 Questions
570 Questions
508 Questions