2000 Nissan Quest "knock sensor location" Questions

...knock sensor is located where does the knock sensor located at on a 1999 nissan quest you have to remmove the intake and it is on what looks like a bracket that bolts to both heads is the knock ...

...knock sensor on 3.1 2000 chev lumina test says PO327B for knock sensor bad, need to find it annd replace it Thanks Frank knock sensors are not worth replacing. Most of the time the knock sensor is ...

knock sensor is located under the lower intake manifold, between the two cylinder banks in the valley. It's about a 3 hour job for an experienced technician, but I have to ask why you want to

...knock sensor for replace my engine ligth is on check with computer code say has bad knock sensor I can not locate were is attached or I get the wrong part or I am looking on the wrong place of the ...

...knock sensor located? this isn't a simple repair job, the knock sensor must be replace, I would also make sure that this IS the knock sensor that is the issue here otherwise if you replace and clear ...

...knock sensor located on a 1997 Where is the knock sensor located on a 1997 mercury villiager and is it hard to replace at home Located under the intake manifold center right bolted to the top of the ...

...knock sensor located? the knock sensors (there are 2) are located under the intake manifold, u must remove the intake maniofold to replace them, also u will need the new stub wiring harness most ...

where is located the knock sensor on my 1994 nissan quest  The knock Sensor is located under hood, center, front engine area, mounted on lower engine block below exhaust manifold.

...knock sensor quest 1998,I don't find the knock sensor on the nissan quest 1998 it is buried under the intake manifold. But ignore the knock sensor code, it means absolutely nothing. It will not ...

...knock sensor is on top or the bottom P0325 knock sensor 4 a 96 nissan QUEST the knock sensor is located near the bottom of the engine block, it is screwed into the blocks water jacket, so make sure u ...