2006 Ford Taurus "idle air control" Questions

Idle Air Control (IAC) Valve Removal Disconnect battery ground cable (14301). Refer to Section 14-01 . Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve)

...Idle Air Control motor or throttle position sensor, or a big vacuum leak. Idle Air Control Valve Replacement Clean the throttle body and idle air control motor. Use a toothbrush and brake clean. Also ...

...Idle Air Control ValveIdle Air Control Valve Operation: A computer-controlled air bypass valve located in the throttle body. It helps control idle speeds by allowing air to bypass the throttle plates ...

...The code is for the idle air control valve which controls idle speed. The problem could be a faulty control valve, or a vac leak which is letting in air to the intake and bypassing the control

...and you would hear it) Idle air control hook up? Can you maintain a high idle pressing on the gas pedal,if you can the IAC(idle air control) is the problem,other than that some thing is

...leak. Two look at the throttle body plate and idle air control motor. If the throttle body plate are dirty the seat for the idle air control motor my be dirty. I would try cleaning the throttle

...idle air control valve, sensor on the gas tank, spark plugs wire, coil pack, gas cap. Its my belief that its somewhere in the vacuum lines or air flow. Help!! Any suggestions. Its a great car besides ...

...Idle Air Control Underspeed Error". It can be most commonly caused by a vacuum leak, a damaged Idle Air Control (IAC) assembly or a stuck IAC valve that needs cleaning. Essentially, your engine isn't ...

...idle air control valve) causing the problem. There are many other possibilities causing these idle issues.Engine idles rough. There are few help links with solutions to troubleshoot such idle issues. ...

...Idle Air Control valve) This is my opinion take it at face value. There are slight differences between the 3.0 liter and 3.8 liter. ...