2006 Ford F-150 "anti lock brakes rubbing" Questions

...anti lock sensors is loose or rubbing. Check sensors at the wheels One of the sensors are starting to go bad. You will need to take it to a brake shop and have it checked ,although they will not be ...

...anti lock brack light is on and the TCL light is on, on the dash. The car seems to roll okay and stop okay. What is the problem. My advise is to adjust the rear brakes. The drum should not move in a ...

Anti-lock Brake System (ABS) *Module Anti-lock Brake System (ABS) *Module harness is open or shorted Anti-lock Brake System (ABS) *Module circuit poor electrical connection The Diagnostic Trouble Code

Anti lock brakes activate and make loud rubbing and clicking noise on normal stops on cold days (less than 40 degrees). When the anti locks activate the make a loud clicking sound and a louder rubbing

anti lock and service engine soon lights stay on after brake job just had new brakes put in and these two lights still on First of all your brake pads on this type of car do not have any kind of elec.

...anti-lock brake system acting up. Some of the 2005 Cobalts we had as company cars made a funny noise while braking that went away once the ABS got a full fluid change and the dealership reset the

...anti lock brake light is on as well as my brake lights. I changed the pads, but I have a grinding noise sometimes when i oull off and i hear a clunking noise from the drivers side brake caliper area ...

...brakes and rotors I forgot to mention that it is when I apply the break when it does this it kind of sounds like And elephant blowing out of his trunk I would check the clearance between the rotors ...

...anti - lock brake light has come on twice. There is no mechanical problem showing up so far, and this has been going on for well over a year. Oh also, someone said to use the emergency brake and it ...

...anti lock brakes how do i turn off light an reset fix the fault a scan tool will tell you which wheel it is , some part stores will do it for free. check the wiring to the wheel sensors as they tend ...