2006 Ford Expedition "metric torx sizes" Questions

...to take off the caliber on the front disk brakes? on a 206 ford expedition Have you even looked at the fastners at all? Do you have 3/8" drive Allens or 3/8" drive Torx Drivers,or Metric

...metric set I bought has a 6 and an 8 and 6 is to small and 8 is to big. In SAE 1/4 to small and 5/16 to big. Anybody able to varify if it is an Allen and if so what size it is. 6 mm to small 8 mm to ...

...town and country limited, but i need to know wich size of hex wrench do i need Metric Size --- 10,12 what ever it takes All vehicles from 1980 on ,use mostly Metric Wrenches,Sockets & Torx ...

...Do you know what size socket is needed to remove the cylinder head on a 97 suzuki esteem 1.6 liter engine. your actually going to need a 12 point metric socket. looks like a torx but more ...

...do I use on a 1997 ford explorer front caliper bolts for brake removal? Use an Allan Wrench You could goto ur nearest Ford parts dealer and ask them if metric or standard torx were used and what

...size of the Torx looking boot that holds the front brakes on a 1998 monte Carlo T45 or T50 Have to own a complete set of torx, as well as metric hex drivers to work on brakes or any vehicle ...

...on a 2006 Mercury Mariner What your telling us is---that you don't own metric wrenches or not enough and you have no Torx Driver Bits. Need almost all metric tools to work on any vehicle from 1980 ...

...Cherokee - 6 cylynder I'v tried 3/4'', 11/16'', 12 mm - always slips off What is your question? You have metric tools. Are you missing a size ? Which nut? Caliper mount or brake hose. Or torx

...bolts,for the last 30 years are metric. You need every size wrench and socket ,to work on todays vehicles Also,you will need a good selection of Torx drivers Most common bolts are 10,13 & 15 ...

...METRIC THESE DAYS. GET A MERTIC SET. YOU WILL ALWAYS USE THEM AGAIN. TOOLS ARE A GOOD INVESTMENT. The proper socket will fit snug.The range of sizes is such that one size smaller will feel like it ...