2006 Ford Expedition "change intake manifold sensor" Questions

...change the knock sensors. There are two of them and they are located under the intake manifold. The intake manifold must be removed. I would recommend tha you replace both while you have the engine ...

manifold, sensor and DPFE sensor. I also had an intake cleaner with the machine done and still continue to get the same code. I also around 40 - 45 miles per hour have a spark detonation when shifting

...intake manifold? YOu can't get a used ( even your old one) to reseal well enough to not leak. If you used a new one you could have put the gaskets on unside down or overtightened the bolts. The ...

...change in the EGR system pressure. The DPFE Sensor reads changes in the pressure of the EGR system. There's a vacuum line coming off the intake manifold to the EGR actuator. The actuator is on the ...

...is not overheating, then I would suspect the temperature sensor, if it is overheating then this must be repaired first. The sensor should be mounted in the intake manifold. Hope this helps, let me ...

...CHANGE THINGS LIKE INTAKE MANIFOLD, OIL FILTER, AND SENSORS... ETC. BUT BEFORE I TEAR INTO IT ID LIKE TO KNOW FOR SURE. DO I HAVE TO LIFT THE BODY OFF? TAKE INTAKE OFF? YES THERE IS GOING TO BE A BIG ...

...intake manifold to leak. You cannot check this without removing the line, and inspecting it. This line rots out very often. This would be a good starting point for you. Please rate my answer , if you ...

...intake manifold. Don't take my word for it though , get a second opinion. Could be a large vacuume line is disconected or leaking . change your coil boots check to see if they r wet or to make easy ...

...Intake manifold gaskets and the Solenoids which operate your EGR. For some year models there was a large Vacuum hose going to the Brake booster and the hose would swell and leak Vacuum at the engine ...

...Intake. A change in RPM will indicate a leak. Once you find the leak, repair it and then clear the computer. The Code 0355 is saying the wire for the coil in number 5 cylinder is bad or the coil for ...