2004 Ford Freestar "remove lower strut bolt" Questions

Ad

...remove the lower arm and do the job in a vice on the bench. Replacement ball joints will come with grade 8 bolts ( auto engineering quality) and will simply bolt into place using the holes for the ...

Ad

Question about Ford Freestar

1 Answer

...Remove the lower suspension arm and coil spring. To install: Installation is the reverse of removal. Note the following torque specifications: Strut bar front set bolt: 221 ft. lbs. (300 Nm) Lower ...

Ad

lower. Remove 2 large bolts holding lower strut end. In the trunk 3 smaller bolts hold the strut mount (upper end) in place. DO NOT remove the single large nut at the top of the strut assembly. Wiggle

...Remove and discard the lower arm-to-front subframe bolt and nutRemove the lower arm from the vehicleTo install: Install or connect the following: Lower arm strut into the lower arm rear strut ...

Question about Ford Freestar

1 Answer

...LOWER CONTROL ARM WITH A JACK,REMOVE FRONT WHEEL, REMOVE BRAKE HOSE AND ABS SENSOR HARNESS TO THE STRUT BOLTS OR CLIPS,REMOVE ACTUATOR FROM TOP OF THE STRUT,IF EQUIPPED WITH AUTOMATIC ADJUSTING ...

...Remove or disconnect the following:Front wheel Strut-to-lower control arm nut/bolt and the strut Strut-to-chassis nuts/bolts and the strut Lower control arm Tundra To install: Install or connect the ...

...Remove the lower strut bolts. (Exprerience shows me that removing the lower one first will save you lots of agony...) 6. Remove the two strut mounting bolts that are behind the back seat cushion. 7. ...

...Remove the lower strut and spring assembly bolts and the strut and spring assembly. INSTALLATION 1. To install, reverse the removal procedure. strut assembly removal requires, disconnect the lower ...

remove lower control arm of the chassis where they are located . Do not remove upper mounting strut bolts, remove only two bolts that hold strut to sterrink knuckle. easiest way to take off lower ball

Question about Ford Freestar

1 Answer

...Remove lower strut bolt, Remove bottom wishbone balljoint from hub assembly. Remove top strut mountings. Use spring compressors. Use bar & chain to lover wishbone, remove strut. Refit new strut - Use ...

Not finding what you are looking for?
2004 Ford Freestar Logo

1,841 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...