2001 Ford Focus "tell 3 engine overhead cam" Questions

tell is to open the hood and look at the engine. If it is a dual overhead cam it will say 16 valve or Dual overhead cam. If not then it is just a single. Look at the 8th digit on the vin # 3 = Duel P

...3/4 tank, The message I'm getting is "EVAP Emission Control System Purge Flow Fault". PO441 and PO344 came up at the same time. I put a new camshaft sensor switch, new spark plugs, new wires on and ...

...3.4.The best way to tell what motor you have is to look at the 8th digit of the vin number.It will be a T or an E.T is the 2.4 DOHC.This is a 4 cylinder.The E is the v-6 3.4 cylinder engine.Hope this ...

...tell me in that 3 year time she never changed the oil, so I drove the car for 3 weeks not knowing there was zero oil. I changed the oil about a week ago and the noise just got louder. Dude.. Your ...

...3 engines are below. until you can tell which one, answers will wrong, 66% of the time, is this a good thing? to work on an , first know what's there then read the FSM book on that engine to see ...

...engine and warm it up to the normal operating temperature. 3. Maintain the following conditions for at least 10 consecutive seconds. Hold the accelerator pedal as steady as possible. 4. Let engine ...

...engine is started.
(1) New Sensors: Be sure paper spacer is installed
to bottom of sensor. If not, obtain spacer
PN05252229.
(2) Used Sensors: Clean bottom of sensor and
install spacer ...

...tell you to watch earlier models for transmission bell housings patterns and that computer controlled shifts on 1999 models may not have full compatibility for other years. Some bell housings used 2 ...

...3 then you have a 2.0 DOHC engine. If the digit is a (P) then you have a 2.0 SOHC engine. This is a positive way of telling which engine you have. Should you need further help please just ask. Please ...