2001 Ford Focus "cost master cylinder replaced 2002" Questions

...cost. Is anyone else having loads of problems with their 2002 model? Driver door barrel, wheel bearing and clutch master cylinder all need replacing. It's never ending smaller cars with 4cylinders do ...

...cost a diffrect amout For 2002 Nissan/Datsun Altima 3.5L SFI DOHC 6cyl the Fuel Filter is located: under hood, driver side, rear engine area, passenger side of master cylinder, mounted in fuel line. ...

master cylinder could lose flexibility and may cause brake fluid to leak. Consequence: Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can

...master cylinder at a cost of $500 and if that doesn't work they want to replace the calibers and if that doesn't work they said they will have to try something else???? The cost factor is a great ...

Master Cylinder needlessly, but will cost to test. There are other things to look for such as worn brake pads and glazed pads and bad rotors. The ABS box should Default with a warning should it have a

...master cylinder is attached to it by four bolts. Start by unbolting the master cylinder from the booster and gently bend the brake lines so the master cylinder is out of your way. Remove the rod that ...

master cylinder and that was fixed. The truck drove fine for a couple of days and then the difficulty returned to the point where I could not drive the truck at all. Then it was diagnosed as the input

...master cylinder or slave. part costs £50 will take no longer than an hour to fit! try pulling the pedal back up as it should still work for a while. Yes clutch is done and the pressure plate ...

...Master Cylinders usually cost somewhere around $100 plus the fitting costs and I would suggest you buy the best one you can SENSIBLY afford to buy. It isn't a difficult job but should only be done by ...

cost you more Yes, the hubs may be worn to the point that the ABS Wheel Speed Sensor can't read speed accurately. Have the front end checked out by a technician who works with front end parts. In some