2001 Ford F250 Super Duty Super Cab "change" Questions

...Not auto shifting? My 1991 Ford F250, 5.8ltr has problems with the auto transmission. It will not change gear automatically. It will change manually, but makes no attempt to change automatically. ...

...oil pressure.would changing oilpump and assending unit fix my propblem? do i have to pull motor to change oilpump? what causes pump to go bad? If you're not getting fuel to the carburetor, ...

...a few seconds. This is the frist diesel i have had so i dont know if that is normal or if i need to change my fuel filter or how often do i need to change it. I don't know when it was changed last. ...

...will the engine last? Engines are like us humans. The better care they get the longer they last \Change the oil at every 3000 to 4000 miles and do the preoper suggested maintenance by Fords

running rough and wont idle i have done nothing and need to know what to change is an older truck but only has 69000 miles what do i change first dont change anything yet just go through your regulare

need to change starter on f250 2004 5.4lt. how to change starter on f250 2004 5.4lt. how to change mcdevito75 here, If It"s the original starter let the shop do it as the bolts will be very, very ...

...7.3 diesel motor hard to crank on warm or cold day will crank if it has been plugged in overnite we changed glow plug relay and we changed intake heater relay had it in shop at the ford house had ...

2000 f250 super duty coil#4 I have a f250 super duty 4x4 changed coil #4 and recently just threw a code for coil# 4 once again what might my problem here be??? Many times a bad plug will cause the ...

...trans and my problem is it is running at 6000 rpm at 65mphand icant figure out the problem i,ve changed the vac mod and it hasn't change it also shifts at the at high rpm's.i changed the fluild ...

i have a 2007 f350 and i want to change my i have a 2007 f350 and i want to change my exterior temp reading from f to c degrees can anyone tell me how to do this find the Info/setup/reset button and ...