oil pump, or oil gauge, removed your valve cover, start the engine you can see oil coming out from rocker arm, if there is no oil try to replace oil filter, if not again oil pump is the cause. replace
...oil pump, but... i have to replace the oil pump, but the mechanic said that after i replace the pump the engine might still make noise. what can cause the engine noise after i replace the pump? how ...
...oil pump. You have to remove the oil pan, if the cross member is in the way loosen up the motor mounts and jack up the engine to removed the oil pan. Then remove oil pickup, then remove the two bolts ...
...oil pump 1985 Ford Thunderbird 5.0(L)/302 - base model (not Elan or Fila). Can I replace the oil pump with the engine in vehicle? NOTE: Oil pan has front and rear sump. I have all tools needed to do ...
...it? With out pulling the engine out you need to take the motor mouts loose rise the engine as high as you can drop the oil pan out the back you might have to take oil pump or oil pump pick up tube ...
oil pump on 1990 ford mustang How to access the oil pump Click on link to ...
...oil pump, and it's the same. You should be getting 35-40 Psi @2000 rpm. It could be incorrect bearing clearances. Very small changes in main bearing clearance make for large changes in oil pressure. ...
...oil pump is bad . and causing the bearings to get hot and binding the engine. if some one could help me it would be great. thanks for your time. Yes.sounds like the oil pump is laying down when oil ...
what causes oil pressure fluctuation on 1988 mustang 5.0 Defective oil pump, clogged oil pickup, clogged oil filter, or chunks of debris in the oil sump (oil pan).
Question about Ford Mustang
0 thank the pump is out no oil psi even when i unhook the gauge oil dont hardly come out the line why I believe your suspicions are correct. It does sound like the pump has gone bad and needs replaced
1,000 questions posted
Usually answered in minutes!
694 Questions
653 Questions
589 Questions
617 Questions
433 Questions