1996 Ford F350 Crew Cab "powerstroke cam sensor" Questions

...powerstroke starts fine and runs ok. However it will die as if turning ignition off while driving down the road. Pullover adn turn key off, wait a minute or two and it will restart fine. go down the ...

...cam sensor on a Ford f350 powerstroke diesel motor? Camshaft Position Sensor located above front crankshaft pulley. Use 10mm socket on 1/4" drive ratchet. Crawl under front of vehicle, disconnect ...

powerstroke dually that cuts out and stalls when driving down the road at any speed.. changed cam sensor and filter and added fuel stabilizers. but still does it.. im clueless it has 150,000 miles new

cam/crank sensor, didn't help. vechile speed sensor ?? or accel. pedal sensor ?? any help or direction please thanks By missing, you mean sputtering , I would try bleeding the fuel filter bleed valve.

cam positioning sensor) they were notorious for failure. they are cheap and easily fixed in 10 minutes some people I have talked with have had to change these 1/2 dozen times in 2 years. keep a spare!

POWERSTROKE 7.3 CAMSHAFT SENSOR BLACK FROM NAPA ...I THINK IT IS FAULTY ford has had alot of problems with cam sensors and ford warranted many of them. i have presonaly replaced 5 of them on one truck

...cam sensor was installed. Lift pump is working. Will not start using ether. No computer codes. Need ideas where to start looking. I do have a scanner with data stream capabilities. Any help would be ...

i was drivin my 2004 F-250 6.0 powerstroke and hit cost on the cruse and it died and want start I would suspect cam sensor.

...powerstroke 7.3L, it starts hard, and sputters then dies, changed the cam position sensor and fuel transfer/pickup pump. still not fixed....side note changed oil 1.5 weeks ago, it ran normal till 2 ...

...Cam Position Sensor. I replaced the CPS on my '01 F250 powerstroke few years ago - it was in an easy spot & was able to do it in about 10 minutes...any ideas where & how this is on the '01 ...