1996 Ford Crown Victoria "window motor" Questions

Ad

Window motor by using the connector plug. Then push your window switch and see if there is power. If you have power, then it only leaves the Window motor to be the problem. Jump the connector from the

Ad

...likely those insulators are broken up and when you put a load on the motor such as working the window, the insulators allow the two gears to disengage. Look on ebay for ford window motor repair

Ad

Question about Ford Crown Victoria

1 Answer

...window regulator will overheat the motor causing it to fail prematurely ..u dont want to pay for the repair twice plus it is easier to replace both parts at the same time since they r connected to ...

...motor window in the passenger door's window. The window will not stay up. its not the motor, its the window regulator... good luck finding diagrams- take the door panel off and start drilling the ...

Question about Ford Crown Victoria

1 Answer

window motor runs but window won't move You have to remove inner door panel and then operate window to see exact problem. But it does sond as if the cable for the window motor is bad. If so replace it

...back up. It it still does not move, you may have a blown window motor for that door. You will be able to lift the window to the closed position if weather is a factor until you get the new

...window wont roll and it not the motor please tell me what i can do Check the fuse and wiring to the motor with a multimeter or test light while trying to operate power windows. Take the panel off ...

Question about Ford Crown Victoria

1 Answer

window with the motor never put your hands in a place that they could be mangled by the motor or the movement of the window if it should 'catch'... You can also prop the window up from inside the door

Question about Ford Crown Victoria

1 Answer

...window is down, the motor tries to raise it but cannot, then stops. I want to inspect it but cannot get the door panel off. I called the Ford dealer and the head mechanic can't find any info on ...

Question about Ford Crown Victoria

1 Answer

window regulator motor faulty. have to take the door apart to get to the regulator. you can test to see the motor is working by unplugging the plug and rig small wire connect from 12v to the the motor

Not finding what you are looking for?
1996 Ford Crown Victoria Logo

453 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...