1994 Ford Bronco "spark 2" Questions

...2 and 4 spark plugs and i have no change in idle. i will run a compression test on all cyclinders and post soon. Please help. Thank you Did it spark well on all the plugs? Usually if you have no ...

...spark at the distributor contact. 2. Check the distributor cap, and the rotor for carbon deposits. This must be cleaned. 3. Check the spark plug cables for cracks, it may need replacement. 4. Check ...

...2 you have spark. 3 that your cam timing has not jumped. can you smell fuel in the exhaust? pull a spark plug wire, put a spark plug into it, and lay it on the engine where it is grounded. have a ...

spark plug wire diagram spark plug wire out of senquence on a 86 ford bronco xlt/ 302 mototor it was said that they two differant wire diagram for that engine 1-5-4-2-6-3-7-8 counterclockwise

...spark plug wires one at a time. Fig. 1: 5.8L engine-nl-> Firing order: 1-3-7-2-6-5-4-8-nl-> Distributor rotation: Counterclockwise Fig. 2: 4.9L engine-nl-> Firing order: 1-5-3-6-2-4-nl-> ...

...spark plug wires back into distributor cap in proper order in 1980 ford bronco xlt 5.8L 1-3-7-2-6-5-4-8 there is a number one on ur distributor cap start there ....and there is numbers on your intake ...

...2 sputters and then is fine then sputters Could be fuel or ignition related based on your description.You would need to figure out which problem you are dealing with to proceed.  Could be a weak ...

...2-6-5-4-8 The spark plug gap should be on the emissions sticker under your hood, usually on the radiator support. It may also be on the underside of the hood. If you cannot find the sticker, try a ...

...spark goes.. So I went through web site to find the problem.. I found it. and it said start on left side when you look at the engine.. 1 2 3 4 then right side 5 6 7 8... the fire order is 1 3 7 2 6 5 ...

...spark, that would lead me to believe you have a some kind of fuel related problem. 1) Check your fuel presssure. If low, replace the fuel pump 2) Sheck your fuel filter. If dirty, replace. 3) Check ...