1994 Ford Bronco "fuel hose" Questions

...ether around hoses doesn't change the rpms. check that there is no fuel in the vacuum hose that is going to the fuel pressure regulator, if there is fuel in the vacuum hose replace the

...to start but fails. when I push excellerator down..engine will not attempt to start. the engine is fuel injected..I replaced fuel filter. ....??? Check fuel pressure with a guage that goes high ...

...fuel and a small hose,, take pipe off the fuelpump and fit your hose to pump and pump up fuel ,,,,IS FUEL PUMPIMG UP if yes then its either your inline filter or the feed pipe from tankand you should ...

Fuel filters and some other hose connections on vehicles today use a clip mechanism that is easily released with a small plastic tool. These tools are available in most auto parts stores. They come in

fuel hose held against your ear to listen for vacuum leaks while engine is running. A hissing sound will be heard.Asoapy water solution will also detect leaks. 2. Leaking EGR valve or pluged PCV valve

hose from tool to test port on fuel rail by injectors and drain fuel into suitable container. You can also remove the cap from the test port and with a rag covering the port to catch fuel, depress the

...fuel you should be able to pull a vac hose such as the one to the PCV valve and make the engine speed up.If it is too rich could be a fuel pressure regulator or injector problem.Pull the pump relay ...

...hose that was blowing out the same smoke any ideas would be appreciated 1996 eddie bauer ford bronco 5.0 efi automatic 170k miles well takin care of would really like it on road again Check your fuel ...

...hose) if you do have fuel then just unbolt the fuel pump. its just 2 bolts I think and gently pull it out. there is a lever that juts out. install a new pump (I put a bit of grease on the lever) and ...

...fuel leaking from hose between mech fuel pump and fuel line from fuel tank. Help? Sounds like you are rusted out. Even the factory parts are not that expensive and they are properly bent. Check the ...