1993 Ford F150 SuperCab "spout connector" Questions

...SPOUT connector inoperative my 1987 F-150 seems to be stuck at base timing, whether the spout connector is plugged in or not. I am wondering whether I should replace the spout connecter itself, or if ...

...wire spout connector (yellow/light green) or remove shorting bar on double wire spout connector at ignition module (terminal #5)*All accessories off*Transmission in neutral (parking brake

...spout connector to set timing check this out : http://www.f150online.com/forums/v8-engines/369388-95-ford-302-timing-procedure.html the spout connector is problebly dangaling somewhere below the ...

spout connector???) i was attempting to set the timing on my 1987 ford f-150 4.9l I-6, when the spout connecter is plugged in or pulled out the truck is always running at base timing. Not sure whether

...spout is and where the oxygen sensor is its a 92 f150 efi 5.0l v8 spout connector at distributor . shorting plug that that is removed to set base timing and someone probably forgot to put back

...do I go from here? I checked all the wiring and it appears ok (no corrosion or loose wires). spout circiut is the 2 wire connector near dist.used for adjusting timing, check for problem in the ...

...spout (spark plug out) connector.  Then hook up your timing light and rotate the distributor until you're at the timing spec you're looking for.  I believe 10* BTDC is the OEM spec ...

...spout connector" its usually rite beside the distributer it looks kind like a fuse it is grey if u clean it up. remove the spout connector dont loos it.(some ford have the spout connector over on the ...

how do you time a 5.0 electronic fuel injection motor and where should the mark be you need a chilton shop manual for the timing and the spout connector has to be removed to time it

how to adjust the time on F150 4.2L If you mean spark timing, you pull the spout connector from the harness going to the ignition module, then use a timing light.