Mud in fog lights i went mudding in my 4x4 ranger and there is mud in my fog light casings. The lense doesnt come off. how do i clean the casings? you can take the bulbs out and wash them out from the
1994 ford ranger xlt abs code flashes 16 times Check sensors on the brake,s rotar are clean and not covered in dust and mud etc.
...sure the distributer isnt wet and make sure all connections are tight. I took mine through some mud, got the distributer wet, and it died and wouldnt start until it dried. Hope this
Question about Ford Ranger
...automatic lock in by a knob turning inside The shift motor on the transfer case is probably full of mud and dirt and is frozen up. Tap gently with a light hammer, or better to use the end of the ...
...the truck all the emissions control were striped from the engine. I use it simply to "play" with in mud. I replaced the plugs and wires, dist. cap and rotor and still it hesitates bad and dies often ...
...or have you been stuck where you might have overheated the clutch trying to free the truck from mud or
...to tranny case problems I am dealing with a ford ranger 1984 to be exact. Somebody tried to make a mud truck out of it jacked it up 2-3 inches, put a mild 302 in it a c4 tranny with the A(stock) ...
...a new transmition in. any ideas? My wife just recently had a similar problem. She got stuck in the mud and put our 2004 F150 in 4x4 Low to get out. She didn't. Had to have AAA pull her out. She then ...
1,000 questions posted
Usually answered in minutes!
645 Questions
573 Questions
562 Questions
558 Questions
477 Questions