1992 Ford Ranger "coil" Questions

so do i run the wire from coil spot #1 to cylender #1 then coil spot #2 to cyl #4...? The marks on the coils correspond to the cylinder it goes to Coil #1 goes to cylinder #1 Coil #2 goes to cylinder

we have a 2000 ford ranger 4wd xlt. obd2 said "coil pack ignition B". where is it. we replaced the coil pack and continue to have the same problem which is..... at high rpm's the trucks ...

...0$ P0351 loss of power ? That's not what this code is about . P0351 - Ignition Coil A Primary/Secondary Circuit ,you have a bad coil and possibly a bad coil driver inside the PCM

...wires,distributor, there's more but all wires we've tested we ok. I was having trouble with the coil arcing off the frame, but was told the coil had been changed. Actually, I can tell it's the ...

P301 #1 cly misfire this is the code i got, please help can you tell me what my problem is? Coil pack or coil boot, with engine running, remove # 1 coil pack, listen if you hear spark, if you don't, ...

...224 on 1994 ford ranger. Checked primary Code 224 on 1994 ford ranger. Checked primary circuit on coils and they were ok. What else could be the problem? how did you check coils you can ohm them

one coil that is dead, but it is a good coil If the coil is good, the problem is probably the ignition wires going to the coil. It could also be a problem with the cam sensor.

will randomly not start. no spark to plugs. cranks fine. This is probably a coil pack problem or the connections for the coil packs are corroded. Mark all the spark plug wires and where they go on the

could it be? Ignition module is a notorious culprit. Since yours has ignition wires, it has the DIS coil option (as opposed to individual COP coils on each plug). The Coils are famous for failing, and

WHY DOES 2001 FORD RANGER KEEPS BLOWING THE IGNITION COIL I HAVE REPLACE 2 DIFFRENT COILS ON THIS TRUCK AND IT KEEPS BLOWING OUT THE COIL I doubt it does Need more details Different coils every time? ...