1992 Ford Ranger "change motor mounts 1995" Questions

Ad

...work fuse ok,new wiper motor,new switch, new relays. what else is there? Wiper motor quit working. changed relays, fuse is ok, and got a new motor. What else can I check? Do you have int wipers? If ...

Ad

...motor was bad but still nothing. i would hate to change the switch out if is a ground problem. what do you think? There is also a box inside the radio compartment area where the radio mounts that has ...

Ad

Question about Ford Ranger

1 Answer

...motor mount or there a way to change it an not take the mount off? The motor mount needs to be removed to change the belt. The labor guide is 1.5 hours for a trained technician with experience. There ...

Question about Ford Ranger

1 Answer

motor mount how can i change the mounts without a lift/cherry picker? put a jack under motor to support the motor then replace. Might want to put a 2x4 and some rags or blanket between motor and jack ...

...motor mounts and trans mounts rubbers are soft, are they difficult or expensive to replace? No, if you have an engine hoist they are very easy to change (1 nut and two bolts per engine mount, two ...

Question about Ford Ranger

1 Answer

Changing A/C belt I am thinking about buying a 95 Del Sol. The owner said the belt for the A/C needs to be put on but it requires that the motor mount be remove to put it on. Is that correct? yes ...

Question about Ford Ranger

1 Answer

...change the waterpump on my 1995 Buick LeSabre v6 engine. Do I need to remove the right hand side motor mount to gain access to the mounting bolts? Yes u do, also lift the engine for easier access on ...

Question about Ford Ranger

1 Answer

...change a motor mount on a 95 Cavalier? It's on the passenger side of the car. Depends on which one you are replacing? If you are replacing the upper one on the belt end of the engine, yes it's on the ...

Question about Ford Ranger

1 Answer

...motor i put in is from a 1995. now im having prob. with shreading serpintine belts. the power steering pump seems to stick out about a half inch farther than the rest of the pullies. are the mounting ...

Question about Ford Ranger

1 Answer

...the pulleys properly. also if you wish the inner fender well could be removed to help access but you will have to remove the motor mount. Mine is a 1995 grand am gt with the 3.1 v-6. Hope this

Not finding what you are looking for?
1992 Ford Ranger Logo

1,000 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...