...TOWN & COUNTRY TRANS AXLE PROBLEM. MY 1996 TOWN & COUNTRY VAN IS HAVING SHIFTING PROBLEMS! AND THE ENGINE LIGHT WON'T GO OFF! I BOUGHT A CODE SCANNER/READER BUT STILL CANNOT GET THIS VAN OUT OF "LIMP ...
...town and country, When you open sliding doors 4 ways flashed, they stopped working now when opening doors and my daughter was driving and the headlight went out and came back on twice. The codes that ...
...town and country will start rough and will not idle only when the pedal is half way down to the floor. HAVE SOMEONE EXTRACT THE CODE FROM THE CAR'S COMPUTER. IF THERE IS A CHECK ENGINE LIGHT ON THEN ...
Question about Chrysler Cars & Trucks
...town and country alarm a 1997 chrysler town and country alarm systemhow do I disconnect a 1997 chrysler town and country alarm system You can't. You can't . you can't ... Have the codes read and find ...
town and country and got a code of 1 2 4 3 5 5 and I cant find anything on the internet can you help the 55 problem code is no more codes stored, or end of cycle. code 43 is problem in power module to
town country 1996 you can take it to auto-zone and they will read for problem codes for free of charge. with an OBD-II scanner. to tell with area the problems in. good-day ! but check engine light has
Question about Dodge Intrepid
town and country? code p0740 refers to torque converter clutch(TCC) solenoid---circuit malfunction====causes wiring--TCC solenoid---ECM/TCM When this unit becomes a problem it will indicate as no gear
Question about Dodge Intrepid
...town and country 3.3, why fuse blows? Even after a fan has been replaced, and relay been replaced. After clearing the computer by taking off the negative cable. The code came back on after about 8 ...
...town & country engine code p0135 Code 135 is for a problem with the heater circuit in the O2 sensor for bank one sensor one. That is the sensor for bank one in front of the catalytic converter. ...
Question about Dodge Intrepid
2002 town and country lxi struggles on acceleration check engine light blinks go and get a code reading but it could be a transmission problem i will check into it some more
1,377 questions posted
Usually answered in minutes!
1,166 Questions
867 Questions
766 Questions
627 Questions
548 Questions