...remove the transmission to frame connector. 12. there will be 6-9 13mm bolts that connect the transmission to the engine. remove these 13 . do not separate the transmission yet. 14. disconnect the ...
...transmission drain fluid...remove filter,, easy to locate by looking at the new one you bought....reinstall pan and fill with transmission fluid.....you can try this step...if still accurs.. need to ...
...remove the bolts which hold the transmission mount to the transmission, and the ones holding it to the car frame, now you should be able to use a pry bar to remove the mount. If it is very tight, try ...
...such as your speed sensors and other actuators on and in the transmission.This sensor should be removed and installed by a transmission repair
...It's part of the transmission control module, bolts up to the side of transmission, with a harness with about 10 or 12 pins, if it's remove it will have to be relearn, for transmission to work
...Remove transmission cooler and reposition cooler out of the way. Remove lower radiator cross member support and position a jack stand under radiator for support. Loosen adjusting T-bolt, but do not ...
...cost of the parts, labor to replace it and remove and install the transmission. I hate giving bad news but I need to be honest about the problem and tell you straight up instead of wasting your
Remove sensor. Ton install... Install sensor and push sensor down until contact is made with the transmission case. While holding the sensor in this position, install and tighten the retaining bolt to
...the transmission and the oil pan than unfortunately for you the transmission will need to be removed on order to repair the bad frost
were is the transmission drain on a 95 dodge intredid es there is no drain u remove the pan to drain the the transmission fuild
1,377 questions posted
Usually answered in minutes!
1,166 Questions
867 Questions
766 Questions
627 Questions
548 Questions