2002 Dodge Intrepid "motor pulley car loose" Questions

car makes loud whine when i turn the ac on This is most likely the ac belt either bad or loose on the pulleys. This could also be the blower motor which would cause you to lose all AC if it goes ...

...pulley top left, is an adjuster bolt, turn til you can slide belt off easily; hoped this helped i have a 2002 dodge intrepid 2.7 motor i can get the back ac belt loose but can not figure out how to ...

...motor did i lose a bearing...also are all the pulleys on the belt supposed to turn, or is there one that is fixed You have a clutch fan on this vehicle. you need to make sure if it is the fan that is ...

motor... when i turn the crank pulley everything seems to turn fine the belt doesnt seem to be slipping i'm just somewhat unsure about a few of the timing marks on some of the pulleys and if its worth

...motor with the belt off negative side of battery disconnected, check all pulleys especially the ac compressor pulley, make sure they turn easily and there is no binding, make sure there is no oil ...

motor you will bend your valves if you havent already done so...If pulley did not come all the way loose due to timing cover not permitting this is a great sign...The camshaft pulley is attatched by a

pulley is loose. I own a 95 K1500 V8 Chevrolet 5.7L 4x4 just wondering if the bearing is worn do I need to replace the whole compressor, or is it possible that there is no problem with the bearing and

is there a way to replace pulley belt without taking off the motor mount no. isnt it a great design? Its easiest to take the bolts loose then take out the one stud and spacer,and slide the belt out/in

...motor would shake along with a loss of oil pressure on your gauge in the vehicle. By the rattling it can be two things that come to mind either the harmonic balancer is coming apart or the pulley is ...

...motor de un jetta 2007 to remove the hopper you need to remove the bottom pulley then you can remove the bolt. when the pulley is off so should be all the belts, to remove the belt there is a socket ...