...blower started going bad. The resistor replacement would work for a day or so, but then it would go bad. The motor is a relatively easy thing to replace ($50 @ buy.com) and only requires the removal ...
replace durango blower motor resistor instructions blower only works on high you may need to replace the switch,,,they wear out sometimes and only work on one speed. the resistor on the 2003 model is ...
replace durango blower motor resistor instructions 2003 Dodge durango, the blower motor stoppped came back on and stopped again and never came back on. I replaced the blower motor and still no air. ...
...blower motor does not work at all with the heat or the a/c on the rear motor works fine. I have changed the relay and the fuse but it still doesnt work i wanted to know if its the blower motor or the ...
...replace switch if thats what the problem is Usually the blower motor switch is ok. The problem is more likely to be the blower motor speed resistor block which is the device which regulates how much ...
...Blower Motor. This is a common problem with Dodge. I had to replace my own and several dozen others on Chyrsler's, Dodge's, Plymouth and Jeep. Make sure you disconnect the Battery and wait for ...
...blower motor resistor. You can get it from your Dodge dealer for about $15. It is located under the glove box. Check the plug for any melting on contacts, this could mean a connection problem. If ...
...blower motor. Remove the harness and you'll see 2 screws holding it in place. Remove the screws and the resistor will fall right out. Hold the new one in place and replace the screws and plug the ...
...cover soldered joints.. To replace blower motor, locate it and remove it. If complicated by location, spring for $20. and get a manual (which will help you many more times with other stuff as
2003 Dodge Ram blower motor runs only on high. You need to replace the blower resistor.
1,424 questions posted
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
1,005 Questions
766 Questions
