2002 Dodge Durango "hard change ball joint" Questions

Ad

Question about Dodge Durango

1 Answer

change a burned out bulb. I can' t seem to figure out how to remove the head lights. if you even need to do that. 2002 Durango. You need a 10MM socket with a 3" extension bar at least if not longer. I

Ad

...hard left turn reverseing out of my driveway that is felt in the steering.Have had it at the dealer several times.They have checked the intermediate shaft,replaced the drivers side drive shafts,sway ...

Ad

...change if they are bolt on but getting to them is the hard part.So be very careful!!!!!!!!!! There was a recall on the 2000 Durango ball joint (not lubricated, and can break) You sure they weren't ...

Question about Dodge Durango

1 Answer

hard to do yourself? How long does it take? upper ball joints are really easy, but you can't buy them without the a-arm, I just did one if the a-arm bushings are ok, just change out the ball joint and

...hard to change a drivers side ball joint ? my drivers side wheel is making a rubbing noise when on turning wheel also it creeks when driving long and clunks too i think its the ball joint going i had ...

Question about Dodge Durango

1 Answer

...hard is to them It's not required to change the upper and the lower at the same time. However it will save you time if you do them both as if one is going out the other will soon. The actual job is ...

a Astro Van? I do have a modest mechanical knowledge and ability. its not extremely hard. you will need a Pickle-Fork (Ball joint Seperator) Some ball joints are bolted in and some are Ring-Clamped in

...hard is it to change ball joints and tie rods on a 1993 g20 Chevy van I have a friend that replaced his own rack-and-pinion on his Chev wagon in his driveway. Check Youtube or get a Chilton from your ...

...under the control arm near the ball joint,take a good size hammer and hit the ball joint stud hard,and drive it threw.Remove the snap ring first.If I can help anymore let me ...

change the left transaxle. I have taken the wheel off and the hub nut, taken the Tie rod out, taken off the bolts to hold the lower are so that it can move down. I Have taken off the Ball Joint nut. I

Not finding what you are looking for?
2002 Dodge Durango Logo

1,424 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2001 Dodge Durango
2001 Dodge Durango

1,378 Questions

2004 Dodge Durango
2004 Dodge Durango

1,005 Questions

2003 Dodge Durango
2003 Dodge Durango

766 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...