2002 Dodge Durango "drive car makes grind noise" Questions

2002 dodge durango change wheel bearing driver side runs fine in 2 wheel drive but when in 4 wheel drive makes grinding noise nothing yet need help I you have freewheel hubs the fault is there.

...makes a noise like a ball rolling in a drum, which would almost make you think there's a hole somehwere. Now, however, I can hear grinding on my left front tire when I turn and sometimes while I'm ...

...drive its fine when put into 4 wheel drive it makes grinding noise any ideas Don't know about this one but some front axles are two piece and have a support bearing between the transmission and ...

drive and it also makes a grinding noise when I place it in park sounds as if the yoke on the transmission or maybe transfer case is damaged so when you put the truck in drive causes the gears to turn

...makes a grinding noise in the front end. if i just lay my foot on the brake pedal it stops. I have replaced the wheel bearing on both sides and checked the differential bearin four wheel drive. non ...

...noise coming from the right front tire. I have a 2000 dodge darango, just a couple days ago while I was driving and came to a stop it made a bad grinding sound. Now the sound is not when I drive only ...

...makes a noise like a ball rolling in a drum, which would almost make you think there's a hole somehwere. Now, however, I can hear grinding on my left I had the drum repair because it was ...

...makes a grinding noise when driving normal but does not do it in 4 wheel drive..what could be the problem and why wouldnt it do it in 4 wheel drive as well When you are in 4 wheel drive there is a ...

...drive and start to go it hesitates then goes but makes this loud grinding noise until you get over 30 and only does this when you first start to take off. All the fluids and fliters have been changed ...

...have a 2000 durango 4x4 automatic it makes a grinding sound in front end when driving but noise stops when you lock it in 4 wheel drive any thoughts might check the bearings to see if properly ...