column shifter, worked on it and found the issue to be a pin that comes out in the steering column to block the shifter when the truck is turned off in park. When you turn the truck back on the motion
column shifter the column shifter is loose, when it is in the park position the truck will roll until i push the shifter arm up a little more same goes to starting the truck if the shifter isn'
Question about Ford Cars & Trucks
...the shifter or a broken shifter shaft/restriction. The column is easily lowered to inspect the shaft. If the cable is stuck, it should be replaced. Internal transmission problems requires a
column that hold the shifter in place are worn out ot the brackets holding the bushings in place have come loose allowing for excessive movement with the shifter shaft. These things also had a problem
...column) shifter had to be in a certain postion to start but the one time i tried to start it i moved the shifter a little to far and now the handle just sit there you can wiggle it around but nothing ...
...shifter cable hooks up the the sterring column. It is a tube that runs from the shifter handle to the cable. Ford will sell you 2-3 pieces, but first get under there and look for lots of play. It may ...
auto there is a plastic cover near the shifter that pops out and inside it is a way to put the car in park to remove the key. I had a floor shift and I'm not sure if the column shift would be the same
...shifter and heard a cracking sound. It now moves freely between park and neutral, but does not shift gears. It appears that there is a linkeage break within the dashboard. behind the steering column. ...
Question about Dodge Durango
...column type. Can't get it out of park with even stepping the foot brake make sure theres nothing preventing the pedal from depressing fully Its maybe your brake pedal position relay. Do yo hear a ...
...column. GM has had some problems with this , If you have the console shifter there is a micro switch that when put into park a linkage pushes on this micro switch closing the circuit to ignition lock ...
1,424 questions posted
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
1,005 Questions
766 Questions