2000 Dodge Dakota Quad Cab "replace front control arm" Questions

if the upper control arms and ball joints on a 2006 dakota front end are replace does it have to be realigned yes

front end clanking when going over bumps in the road jack the truck up so tire are off the ground then get and 3 or 4 foot pry bar or strong pipe and put under tire lift up on bar if the tire moves up

...front end. yes the replacement presses down when u tighten the castle nut to torque specs and the nuts and bolts hold it in place as well--use a fork dont cut into ball joint will be cutting forever ...

...front brakes over heated and froze. The delaer put new brakes on and they froze up shortly after that. Thanks in advance for all your help I HAVE A 2003 DURANGO THAT DOES THE SAME, IT IS EITHER THE ...

...CONTROL ARMS. NOW MY FRONT IS ALMOST TOUCHING THE GROUND. I NEED SPECIFIC INSTRUCTIONS ON HOW TO ADJUST TORSION TO BE THE SAME AS MY BACK END OF TRUCK. PLEASE HELP ME. jack the front right up until ...

...front. I was told it could be a rock jammed in the brakes but i have my doubts. If it is a rock how could i get rid of it? I tried driving in reverse a little ways and the noise seemed to have gotten ...

...front end of 2006 Dodge Dakota - both sides Seems to originate from Shock mounts at bottom Could be ball joints or lower control arm bushings.You can try soaking the bushings with wd40 and see if the ...

...replace to correct these problems or it the ball joints will correct it automatically. New ball joints and tie rod ends should tighten up your front suspension nicely. Once you have those new parts ...

...front brakes/rotors replaced and seems since then it was happenin but not always Could also be the upper ball joint, put a jack under the lower control arm and jack the left wheel off the ground, the ...