2000 Dodge Dakota Quad Cab "need lift pull motor" Questions

Ad

...clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to ...

Ad

Question about Dodge Dakota

2 Answers

...lift the motor to accomplish this. Your best bet would be to use a cherry picker. You'll have to disconnect the battery, and any thing else that will impede you from lifting it. You don't have to go ...

Ad

...need motor only it might come without regulator. Either way when you have the new part(s) It will give you an idea of what has to be removed look for plastic covers (round) or screws and remove them ...

Question about Dodge Dakota

1 Answer

...need one to pull on glass from the top the other to hold onto the window regulator (this is what the window fits into looks like a scissor lift. Pull glass till it is free on both sides. Now tilt the ...

Question about Dodge Dakota

2 Answers

lift gate. It should need a 10mm socket. The remover the lift gate handle with a "star" driver. Similar to a screwdriver. Then there are 4 plastic push type anchors inside the lift gate panel. You can

Question about Dodge Dakota

1 Answer

...need steps to remove engine Go to auto parts store and buy a repair manual. Basically you will have to drain the antifreeze and remove the radiator. Remove everything that gets in the way of lifting ...

...need advise on pulling a 7.3 powerstroke engine. The firewall looks to close to allow lifting it? in a shop we use a lift to lift the whole cab and box just to get to the motor but you might be able ...

motor in a 1994 grand am First you'll have to remoe the door panel and all the little pieces: Remove the little plastic slide piece that locks the door (I'm assuming if you have power windows you have

...LIFT GATE TRIM PANELS.DISCONNECT THE ELECTRICAL CONNECTOR AT THE REAR WIPER MOTOR, THEN REMOVE THE TWO MOUNTING BOLTS SUPPORT WIPER MOTOR WHILE REMOVING BOLTS.THEN INSTALL NEW WIPER MOTOR AND PUT ...

...then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

697 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

1,021 Questions

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...