2000 Dodge Dakota Quad Cab "fluid drained replaced pinion seal" Questions

Ad

...fluid has still been available to the rack, no other damage should have resulted due to the seal seeping/leaking. The rack will have to be rebuilt eventually, or replaced. You can drain the boot or ...

Ad

my rear differential fluid has condensation /water build up in rear case Is the front pinion seal leaking any oil? if so replace seal. If not drain oil out of differential and reseal and add oil back.

Ad

pinion and ring gear    Solution:  u have to unscrew the cover of your differential and drain the fluid, then visually inspect  what happend indside.&

...when this happens can you please tell what the problem might be. the seals in the rack and pinion are blocking the fluid from entering the left side,no one repairs racks any more they just replace ...

Question about Dodge Dakota

1 Answer

...pinion seal on the transmission this is not such a big job. Put a dab of light paint or Tippex correction fluid across the universal coupling so that you can put it back together in the same pattern. ...

Question about Dodge Dakota

1 Answer

...FLUID REMOVE LOCK BOLT SECURING PINION SHAFT HOLD PINION GEARS IN AND REMOVE C LOCK FROM INNER END OF THE AXLESHAFT. BASICALLY FORD AND CHRYSLER DIFFERERENTIAL ABOUT THE SAME YOU SHOULD HAVE NO ...

Question about Dodge Dakota

1 Answer

...fluid is leaking - on which side of the car is the rack and pinion when sitting in the drivers seat. Hi, Aillathu, The rack and pinion unit fits across from left to right....It is fitted onto the ...

...pinion. Install the rear differential assembly into the vehicle. Adjust the differential side bearing preload and the backlash. Perform a gear tooth contact pattern check. Install the brake backing ...

...Always do the finger check on a gear box when drained of fluid - the stuff that sticks to your finger will tells you a lot about the general condition. A good gear box free of wear has no

Question about Dodge Dakota

1 Answer

fluid is done comeing out then take off cover. to take the axel out to replace the seal you have to push the axel inwards to remove the C- CLIP on the end of the axel shaft that slides into the inside

Not finding what you are looking for?
2000 Dodge Dakota Quad Cab Logo

697 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

1,021 Questions

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...