1995 Dodge Intrepid "removing centre console" Questions

centre console, and all the small bolts/screws along the top of the dash. There may be others, but I haven't done this in a while. Pull the dash back, and the heater core (part of the hvac box) should

...centre console and the lower half of the dash panels to get access to the air ducts. You will then have to disconnect the heater hoses on the engine side of the firewall and then remove the ducting ...

...centre console down into footwell and remove Popper from each side. Pull console forward slightly and disconnect cigar lighter. Remove centre console. Remove 2 screws below the radio. Pull ...

centre console how to remove trimmings around centre console to get to screws if any.Need to get inside console to replace light for automatic transmission display located in console. much appreciated

how to remove centre console i have a standard centre consol without the arm rest. i have purchased an entire centre console with arm rest and want to replace the existing with the new one

...centre console Hi, really easy if you know how! Use a curved piece of wire to hook in and behind the eyeball (I bend one into a tight U shape push in and pull back) grasp wire tightly and pull hard. ...

...my hyundai excel twin cam 1999, but cannot remove it from the centre console - it is bolted into the unit, and i cannot remove the face from the centre console Try grow a ****, that sometimes ...

...held by clips. 2 centre glove box liner, 3 rear console air vent. 4 centre console held by screws. audio stack held by small bolts. make sure you remove gearshift from P before you disconnect

...There will be small plastic covers on the sides of the centre console concealing screws and under the cup holders and at the bottom of the centre console. Gently pull up on dash trims to unclip ...

...centre console. It can be accessed from the side by rolling back the carpet but if removal / replacement is required then the centre console will have to be taken out first to get to the mounting ...