1995 Dodge Intrepid "back lights" Questions

how do i change the two front inside light bulbs on the top at the back of the head light you ell fid two plastic clips they are long and run down the back of the light there is one on the right and ...

...work,horn works,cruise control works? Could it still be the clock spring going bad. Just got my car back from the garage for this exact problem. It started about 3 months ago. The airbag light would ...

...not show any fault codes. I clear the light while the engine is running and the light does not come back on. But as soon as I turn the engine off and then turn it on, after 5 seconds again the light ...

...lights on dash turn on and work but only when i hold back the high beam switch back, and as soon asi let go they all stop working ,and now if i want to drive at night i have to hold the high beam ...

Replacing back up lights Im having trouble getting to the back up lights in the trunk lid...of my 97 intrepid. you might need to take the whole lamp assembly off,the car and change the lamps,

How to change break light? How to change back break light?How to get cover off... pull the carpet back in the trunk, and you should see some black plastic wing nuts, un-screw those and the whole lamp ...

my dash light or my back lights will not come on have changed back bulbs n checked fuses and they all look fine what can b the problem check voltage in and out of the switch, sould give you a good ...

...lights up. First thing I'd do is look under the dash at every wire that might have come loose due to being kicked by a foot or a plug damaged somehow. If none of them are damaged or obviously broken ...

...lights came back on. What else could we check to see what is causing this problem? Please help. http://www.dodgeintrepid.net/showthread.php?t=187235 This site discussed that very problem. Might be a ...

...lights come on (no cranking) and off is one click back. off-on off-on, off-on The codes will blink out on the check engine light in pairs, 5-5 being the end of the test. Or the codes will display on ...