1991 Dodge Caravan "took car seat apart put" Questions

...took both clutches apart and found a gasket that had not been seated properly and replaced it. workes fine. The lip of the gasket wouldn't go into the place it should. I assembled the disk put on ky ...

...seat would not go up or down but want forward and backwards and would recline. Took it apart and we need to know how to put it back together now? buy the service manual?? USA is here ...

took the seat apart earlier to manually move the seat back and now that I put it back together none of the driver side seat controls work but the passenger side works fine. I'm thinking I plugged some

took seatbelts apart and dont knw how to put back well i was going to clean out HIS el camino (HIS BABY) and so he decided it is easyier to take out bench seat. so i need to know how to put the seat ...

...took the seat out, and bent it back into position with a pair of channel locks. Oh, and I had to cut the protective plastic cover off of that rear latch assembly to get a good whack at it. It's ...

...seat back up either. I took almost the the hole darn rear of the vehicule apart, it still won't loosen. I'm also at lost I think you have to remove headrst bfore folding seat back down. You may have ...

took the idle screws out of the front be very careful when you put them back in. Just turn them until the stop, DO NOT tighten them after they stop on the seat.They are soft and will lose their shape,

...seat belt.  To make matters worse it was fully extended and I could not straighten it.  Here are the steps I took to get it corrected.I took off the handle to the sliding door.  There ...

...for free as a courtesy on an oil and filter replacement, at good repair shops. You took it apart, I'm sure you can figure it out. People that aren't auto mechanics, think everything's so

...car stopped working properly and had a horrible whine in the (front it sounded like.) I took it to the mechanic and it was the spider gears. One of them was completely smooth. a second one wasn't so ...