1990 Dodge Dynasty "check engine" Questions

check-engine light. If nothing, make sure the computer is receiving power when the key is on. Check the fuses relating to the computer. Does this engine have overhead camshaft? If so, check the timing

...check fuel system: try to start engine several times, then extract spark and check if it smells with fuel if both a ok - then try to "dry" sparks, extract all of them and warm up electrodes with ...

...check engine diagnostics code and I am pretty sure I saw a 3 5 5 come across and the 5 5 doesn't count. So the error code is 3? I am doing something wrong. Need to get the diagnostics code from my ...

...than the pump has failed. If there is no power than we will again need to check some fuses, wiring, and relays/switches. What engine do you have?have you tried starting the vehicle with carb

...check engine light is on then you can access the cars computer and check for codes by inserting the ignition key and doing the following; turn key off-on, off-on, off-on (on is when the dash lights ...

engine and is not leaking. Also check any other hoses connected in that area of the manifold. The line should go thru the firewall and make it's way to the control panel. If you can hear a hiss at the

...if fuel pump is running and if it is it sounds like a fuel filter. Also if it is fuel injected I would check my fuel pressure. Something is letting fuel in but not enough to keep engine ...

...Tire has been balanced and air pressure is correct A place to find a front end diagram? Thanks it could be a bearing or tie rod end or even a shock Check your engine mounts and transmissions

check engine light on and burning smell in car check catylatic converter.

...Check engine light may be from another fault, being a 1990 you can not plug in a diag computer without starting engine turn key on and off 3 times leaving on for the 3rd and count the blinks on the ...