1989 Dodge Dynasty "39 loosen tensioner bolt" Questions

...tensioner for serpintine belt, can't take tension off belt , it will not move in counter clockwise direction like its supose to, why ? new belt tensioner installed, bolt tightened, using a ...

39;t find the tensioner bolt to loosen the belt to install the alternator on my 2005 Ford Freestar 3.9 liter v6 motor You put a long ratchet in the tensioner hole to remove tension Only a few vehicles

Loosen the driven accessory's pivot and mounting bolts. If removing the alternator belt on a 3.0CL, pull back on the belt tensioner with a commercially available tool. Remove the belt. Install the

39;m looking.To loosen belt, you loosen the tensioner pulley nut, and then turn the adjusting bolt in to relieve tension.  When putting the belt back on, adjust tension with adjustment bolt, then

...39;s path. It may be possible to loosen the idler pulley as well as the main component, making your job much easier. Depending on which belt(s) you are changing, it may be necessary to loosen or ...

...39;s engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine off. IF YOU HAVE AUTOMATIC BELT TENSIONER ITS BROKEN  IF BELT ...

you have to loosen the bolt on the front of the pulley and then the tension bolt. If you don't loosen the bolt on the front of the pulley the pulley can't move when you turn the adjuster bolt

...loosen the bolt.  Be careful, though - depending on which pulley you're removing, and whether or not your engine is an interference engine, you'll want to be careful not to turn the ...

...loosen it.  There will probably be two other bolts that need to be loosened (just loosened not removed).  Move the alternator to its " most slack position" pull the old belt off anf fit the ...

...39;s 2 bolts that need to be loosen to take the power steering belt off (this is serpentine belt 1) Once you loosen the bolts, simply rotate the pulley and remove the belt from the pulley. I believe ...