...the rotors when you changed them. esp. wd 40 or brake fluid. does it stop evenly and and as quickly as before? If so, were they metal or asbestos brakes? Asbestos might burn if the rotors were
rotors on a 2004 dodge ram 1500 Remove the tire, and the rotor pulls straight off like the tire. Unless you have disk brakes. In that case, feel the back of the caliper "its whats holding the rotor on
...brake pads for customers. Heavy repeated braking will make em warp and vibrate like that. also changing the pads without turning them on a lathe will often leave them warped. Usually caused by either ...
...changing my rear brakes on my 2004 RAM. Is there a trick to getting the rotors off, they appear stuck. Do I also need a tool to push in the caliper pistons, are they screw in or press in?? Thanks ...
...the car shakes at speeds above 35 mph with brake only it is most likely warped rotor you will feel it on highway- the more you brake the more shake- replace rotors and should do pads too for even ...
...i just changed all four brake pads and rotors in my 2005 dodge 2500 and the rear brakes aren't releasing properly i wanted to see if you had any ideas on how or why it is doing this not bleed ...
...when braking at highway speeds. The shop has tried everything up to replacing the lower control arm bushings and still have shudder. what now? Have you tried changing tires and the brake
Front brake locks up and is smoking Change brakes, rotor, caliper u may have a bad master cylinder
i'm hearing a clunking sound when i turn to the right.i also have a a bad grinding sound that is coming from the rotor.i have a ton of break dust on the rim also.i had a flat tire and when i changed ...
I feel a vibrating/pulsating feel in the whole truck when the brakes are applied. I have changed the front wheel bearings, rotors, brakes and calipers. Also had the rear calipers checked which were ...
783 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,318 Questions
1,048 Questions
677 Questions