2006 Dodge Ram 1500 "car acceleration feels blowing power" Questions

power while taking off from stop P0121 The Throttle position sensor is a potentiometer that measures the amount of throttle opening. As the throttle is opened, the reading (measured in volts) goes up.

Lean Fuel Mixture Problem? My kid has the 91 Ram 50 RWD. It had a rough Idle so I changed out the plugs which were lean /White and the fuel filter. The Truck did not want to accelerate well at all ...

acceleration power is seemingly ineffective. It feels like the turbo has lost power, perhaps there is some connection between turbo boost assisting the blower for the air conditioner and the wastegate

...Power Train Control Module? Received error code P0308 regarding ''misfire on cylinder 8'' This flashes 3 times and then stays on after battery is disconnected and driven again. Misfire only occurs on ...

...FEELS LIKE IT IS STRUGGLING FOR POWER WHEN ACCELERATING. P0202 is cylinder 2 injector circuit malfunction. And P0302 is cylinder 2 misfire. The # 2 fuel injector is the problem not the spark plug. ...

...power my 2000 rodeo manual trans. started feeling a little slugish and there is a lot of noise coming from the engine. It sounds like the engine is blowing air out somewhere (possibly a vacum leak, ...

...power when driving, it is blowing black smoke on occasion and seems to be straining (need more rmp to maintain speed) When I pull over truck idles rough at about 2000 rpm (shaking) when hot , when I ...

...acceleration below 50 or above 55. Feels like its in the engine. Its not the wheels or tires. It starts when i hit overdrive. I have a 97 ram 1500 with the same thing 45-50 OD kicks in and it would ...

...blowing black smoke, no power, can hear the turbo but not kicking in, feels as though the whole air is coming out of it when accelerating, happend all of a sudden. im not sure if the turbo is blown, ...

...feels like it's tied to a tree!~~~ I had some O2 sensor codes -- replace the rear two -- now no codes even with it performing like it is. Should I replace the other two O2 sensors? This also occurs ...