2001 Dodge Ram 3500 Truck "repair cam position sensor 2000" Questions

...I don't seem to be getting fire to the coil pack. any tips on testing or repairing? does it have a crankshaft sensor? My experience is cam position adjusts timing, crankshaft sensor allows

...Repair Guides Cits on the bottom of the engine block, there is a heat shield covering it, thats why you can't find it, its around the intake manifoldomponents Systems Crankshaft Position Sensor ...

...cam position sensor. 2000 Ford Taurus V6-3.0L DOHC VIN S Camshaft Position Sensor: Service and Repair REMOVAL 1. Disconnect the battery ground cable. For additional information, refer to Battery. 2. ...

Repair guide -- The crankshaft position sensor is located next to the flywheel. The crankshaft position sensor is located next to the flywheel/torque converter. The camshaft position sensor is located

...cam or thottle position sensor did you unhook battery when changing timing chain, this resets computerfor new timing. if you have spark its not a crankshaft sensor.there are marked links on the chain ...

...and lower repair cost. Without codes, next to check would be Crankshaft Position Sensor and Camshaft position Sensor. If both OK and all relays are OK, you should have spark. +1 on crank and cam ...

...Cam Position Sensor. I replaced the CPS on my '01 F250 powerstroke few years ago - it was in an easy spot & was able to do it in about 10 minutes...any ideas where & how this is on the '01 ...

...cam sensor and $250 later it still wasn't fixed.The next dealer said it was the crankshaft sensor drove away after the repair and another $250 it stalled a mile down the road.I fought with it for ...

...cam position sensor would be located on top of the cylinder head, not in the engine block. It's located between the valve cover (the very top of the engine, the oil cap is on it) and the coil pack ...

...Cam Phasers run between $300 to $500 each. Originally repair bills were in the $1800 to $2800 range, but now there are some "Cheater" tools on the market which can cut the parts and labor down about ...