2001 Dodge Ram 2500 Truck "pcm" Questions

Ad

pcm changed and now transmission wont shift Changed a pcm and truck runs fine but now the tranmission wont shift gears, is this something caused by the pcm? or something else? you might have to take ...

Ad

Question about Dodge Ram 2500

1 Answer

code p0203 P0203 - Cylinder 3 Injector Circuit Malfunction P0203 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is ...

Ad

Question about Dodge Ram 2500

1 Answer

P0205 check engine light on P0205 code Hi there:P0205 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, ...

Ruff Idle and or missing/ loss of power Had a problem with the pcm on my truck(faulty circuit), got a new pcm and had dealer install, after I got the truck back it had a very ruff idle and loss of all

Question about Dodge Ram 2500

2 Answers

symptoms of a bad pcm INSTRUMENTS DEAD. ALTERNATOR DOESN'T CHARGE. SEAT BELT LIGHT STAYS ON. WAIT TO START LIGHT DOESN'T LIGHT . Could be. But these are also symptoms of a bad ground wire. Check the ...

Question about Dodge Ram 2500

1 Answer

...The Throttle Position sensor (TPS) is a potentiometer that provides a voltage signal to the PCM that is directly proportional to the throttle plate position. The sensor is mounted on the side ...

Question about Dodge Ram 2500

1 Answer

,i changed the plugs,plug wires and coil packs and it is still doing the same thing.Could it be the PCM? very well could be i would check the pcm first

HOW OR WHERE DOES THE PCM READ THE VIN FROM It's internal to the PCM (In the flash memory)

Question about Dodge Ram 2500

3 Answers

...about 30% of the time. This is a major problem to diag. Usually requires ground straps installed on pcm or pcm replacement could also be the altenator, wiring, or anything that runs to the pcm or ...

Question about Dodge Ram 2500

1 Answer

how do I clean the pcm connector let me say this plain REMOVE THE BATTERY CABLES and let sit for several minutes to discharge completly before unhooking pcm connector (or you'll be buying a new one) ...

Not finding what you are looking for?
Cars & Trucks Logo

1,162 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...