2001 Dodge Ram 2500 Truck "1996 exhaust" Questions

where is the oxygen sensor for 1996 dodge ram van 2500 All O2 sensors are located in the exhaust manifolds and in the exhaust front pipes close to the catalytic converters.

i have a 1996 dodge ram van 2500 5.2l my problem is backfiring through the intake and out the exhaust and it does not have any pick up or power Sounds like timing is off, or serious misfires.

My 1996 2500 dodge ram 3/4 ton truck has no power under a load No power under load,just disconnect the exhaust from the catalytic if there is a improvement the catalytic is plugged

...1996 dodge 1500 truck now the truck uses twice as much gas and my tail pipes are real suttie what coulb be the problen you need to check and see if they removed the catalic converter on your exhaust ...

i used to get 23 mis gl now 10mi pgl i have change fuel filter no help checked air filter it clean now what ? if you were getting 23 mpg, call Dodge, They still can't get a van to do it. 16 to 18 mpg ...

...exhaust in 1996 monte carlo what can be causeing white smoke from exhaust in 1996 monte carlo? Head gasket failure or a crack in the cylinder head allowing engine coolant to enter the combudtion ...

...for exhaust manifold to head nuts and exhaust manifold to exhaust pipe nuts. Car is a 1996 Odyssey. The exhaust maniifold to head nuts are 23 ft lbs. The manifold to exhaust pipe nuts are 40 ft

...1996 Dodge Ram 1500 W/5.2 FI Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on ...

need to know if long push rod goes into the exhaust valve Does long push rod go into the exhaust valve in a 3.1 engine of a 1996 Monte Carlo? Long push rods are for exhaust valves. Short are intake.

...1996 eclipse gs 2.0 dohc have? The Exhaust Gas Recirculation (EGR) system is used to reduce Oxides of Nitrogen (NOx) in the engine exhaust. This is accomplished by allowing a predetermined amount of ...