2003 Buick Century "tools needed change catalytic converter" Questions

...change the hesitation still is there. It almost feel like the exhaust is loading up. I am about to remove the exhaust cross over pipe as that if it was restricted would still have acted up when cat ...

...Change all the filters, (Air, Oil, Fuel), replace the spark plugs and install new spark plug wires. Then clear the codes using an OBD2 scanner. It may take most of the new tank of fuel for the system ...

change any sensors i can myself but i dont understand what this means. As far as the misfire ill take to a mechanic myself please help. Your best bet take it to a qualified repair shop that can do the

...needed to fail. Ok go to your parts house or harbor freight and get a temperature sensor gun it should have a laser wich where the red dot is pointed it will give u the temp so after getting to he ...

...but a picture of something like a catalytic converter and fan came up, not the oil change with BMW you will need the reset tool.cost in U.K.£285,or your dealer will reset it at a

...tools and can weld. If you are capable of cutting out the bad catalytic converter and welding in a new one you can fix it yourself. If not, I would suggest finding a competent exhaust shop. Changing ...

...change but there is no garuatee that the codes won't come back. 2002 converter are part of manifold both sides but ther is also another converter behind the manifold rear converter there saying ...

...change out O2 sensor ok, thanks, the sensors u have do in the exhaust pipe of the rear cylinder bank as you stand in front of the car, one sensor goes before the catalytic converter in the exhaust ...

...change. all you need is a jack a oxygen sensor tool ( you can get it as a loaner on Auto Zone no charge ) and a new oxygen sensor. If you don't know how a catalytic converter looks like click this ...

...tools. Can I ask WHY you need to change the converter??? They usually last as long as the car. I recntly sold a 1998 Olds with 245,000 miles on it and it had the original converter intact. Good Luck ...