2003 Buick Century "car belt noice" Questions

...temp gets below 30 degrees. I had a Chev Cavalier that did the same thing. the squeaking is simply the belt of your car moving. the freezing temps cause that problem thats why it quits when it warms ...

...accellerated. What could this be? could be a number of things, I'd go with a loose or worn belt , open the hood and rev up the motor, see if the squeal your hearing happens with the car not ...

...have a toyota camry 1996 model. when ever i start the car, a noice is generated at the fan belt area which stops at about two minites. whats making the noice. a bearing in 1 of the pulleys is going ...

water when the car starts on the belt and pump area to see if the sound stops, if belt noise it will stop but if this is the water pump, the alternator bearing or the idler pulley , it must be checked

...car while driving and my eyes seem to water a bit from it. What could this be? check the condition of the drive belt as it may be hard/cracked and slipping .check all idler pulleys for free spinning ...

...A broken timing belt will make the car sound alot different than normal when cranking. could be your timing belt broke or jumped a tooth had that happen to my daughters accord and it was timing

...noice Sounds as if your ignition timing is off... Could be in need of adjustment, a vacuum advance line is off or broken to the distributor, or worse, your timing chain - belt has slipped a

i can hear a high pitched tinny noice high pitched tinny noise coming from the passenger side of the engine by the belt, what could it be? Probably the belt idler pulley or belt tensioner pulley

Have intermittent chirping noice around belts near electromagnetic engaged supercharger? chirping can be a bearing problem on one of the pulleys or components causing belt to slip --worn or bad belt -

...car the engine makes a loud poping noice. Make sure that the belt and pulley are in order, Please pour some water on the belt and pulley and try.again if so the belt is faulty. If not the bearings of ...