Location of heater control valve on a 91 Chevy S10 Pickup V6 2WD way up under the dash on passenger side....follow inlet hose to interior of vehicle should be towards the end inside near heater coil.
...heater control valve. This valve opens when you turn the inside control to heat and allows hot coolant to enter the heater core. If coolant doesn't enter the core, you don't have heat. This valve is ...
...heater control) there is a motor that controls the heater valve connected by a cable to the heater valve under the hood. The motor or cable could be stuck or broken. If you have manual temperature ...
...heater, everything. Then start the car and do not touch anything. Let it idle until you hear the cooling fan come on and then go off. Then turn the ignition off. Process ...
...control cable bracket. Connect the throttle body-to-air intake duct. Install the oil fill tube and level indicator. Install the camshaft housing(s). Install the exhaust manifold. For details, please ...
...Control Solenoid Valve Circuit. 91 Front Heated Oxygen Sensor Heater Circuit right hand bank. 94 TCC Solenoid Valve. 95 Crankshaft Position Sensor. 98 Engine Coolant Temperature Sensor. 101 Front ...
...control valve no heat is cause by many things (coolant not at 180F and holding?) no blower? damper closed. as you said the water valve. location: see heater, see the core, see the 2 brass tubes ...
881 questions posted
Usually answered in minutes!
757 Questions
489 Questions
420 Questions
426 Questions
352 Questions
