1992 Buick LeSabre "bolts holds transmission pan" Questions

Ad

...transmission and tighten the bolts to 165 inch pounds with a torque wrench. Return the Buick to the ground. Replace the New Transmission Fluid Pour 4 quarts of ATF fluid into the filler tube using a ...

Ad

Question about Buick LeSabre

1 Answer

...plug. The transmission fluid pan has several small bolts that hold it on and the whole pan has to be dropped to change that fluid. Good luck on finding hte oil drain plug for the 2003 Buick

Ad

...transmission fluid. You have to follow the manufactures specifications reguarding bolt pattern and torque. If the bolts are not put on in a certain order and to a certain tightness, you are sure to ...

...transmission inspection cover under the torque convertor and also the bolts the hold the motor mounts together so you can jack the front of the engine up about 3 inches so the oil pan will slide out. ...

...transmission Automatic Transaxle Assembly REMOVAL & INSTALLATION Disconnect the negative terminal from the battery. Detach the wire connector at the Mass Air Flow sensor. If equipped, remove the ...

...transmission pan 2000 chevrolet suburban LT Using a 13 mm socket, remove all but one bolt on the transmission pan. fluid will begin leaking out all around the pan. Slowly remove the last bolt while ...

...the bolts that hold the pan on .when you remove that pan you will see the filter.It has atleast 2 bolts that hold it on , remove those bolts.MAKE SURE YOU ARE AT THE TRANSMISSION PAN-NOT THE OIL ...

...bolts, put one in each corner of the transmission pan so that all corners are up and the pan is securely in place. This will allow you to install the rest of the bolts without holding the pan up and ...

Question about Buick LeSabre

1 Answer

...bolts from the transmission pan using a crisscross pattern. Then remove the bolts. Use a ratchet, ratchet extension and socket.Loosen the rear mounting bolts from the transmission pan about 4 turns ...

Question about Buick LeSabre

1 Answer

...bolts holding the pan in place, remove all but one. When ready ensure there is enough clearance to allow the transmission pan and holder to be removed. Remove last bolt, as the pan drops, you will ...

Not finding what you are looking for?
1992 Buick LeSabre Logo

1,071 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...