1992 Buick LeSabre "back wheel" Questions

...do i get the factory wheel off remove the horn cover, usually screws from the back of the wheel, remove the center nut and use a puller to remove the steering wheel, and disconnect the battery ...

...on 1977 buick la sabre at the back of the steering wheel there are scews.then remove the center pad of the steering wheel.you wil also need to loosing the center nut that secures the steering

wheel bearing. If noise moves to the back of the car than you may need to replace the tire. Most likely it is the wheel bearing, I replace them all the time at my shop if it starts making noise around

wheel when car engine is started, it wont move,up on trying hard i will be able to back the car and much difficulty i will be able to steer it make it align straigh and when driving the steering wheel

...wheel back on my 1989 buick lesabre ? do i need a special tool to put my steering wheel back on ? the locking plate retaining ring to push the spring back far enough. if i try to fit everything back ...

...the suspicious wheel. Put one hand on the top of the wheel and one on the bottom and pull back and forth. If the wheel makes a clunking noise and moves in either direction, then wheel bearing is

back of steering wheel. Position inflator module to gain access to wire connectors. Note wire routing for assembly reference. Push in and rotate horn contact lead counterclockwise, and remove from the

...back of the steering wheel) remove the screws that hold horn pad on. Next loosen the steering wheel nut do not remove at this time this is left on to prevent you from getting a steering wheel in the ...

back forth motoin of the wheel. It is conceivable that a component in this assembly has broken, especially if the horn blows when you turn the wheel versus driving straight and the horn does not blow.

steering wheel how should i mount back the steering wheel spirng after replacing the key switch? How did you get it off??? Special too to compress spring