1991 Buick LeSabre "replace crankshaft sensor" Questions

Ad

Question about Buick LeSabre

2 Answers

...crankshaft position sensor should be located behind the vibration damper/harmonic balancer and it will have to be removed before the crankshaft position sensor can be replaced. (Let me know if you ...

Ad

...crankshaft bolt, then tighten bolt an additional 1/4 turn. Replace splash guard, put wheel on tightening lugs to finger tight and then wrench tight in a star pattern. Lower vehicle until wheel makes ...

Ad

...replace it The crankshaft sensor is located behind the crankshaft pulley, you will need to remove the pass/side tire and then the lower cover that covers the pulley area the remove the center ...

...crankshaft pulley "balancer" will need to be removed to replace the sensor and you will need and air impact wrench to remove and replace the big bolt . Also you will need the correct balancer puller ...

...replace a crank shaft sensor on a 2001 buick lesabre my engine stalls and won't restart The crankshaft sensor is located behind the harmonic balancer. There is a special tool you can rent/loan from ...

Question about Buick LeSabre

2 Answers

...Crankshaft Position Sensor. This is what lets the computer to know when to fire the ignition for each cylinder. The part is usually not very expensive and can usually be easily replaced. However ...

Question about Buick LeSabre

1 Answer

...coils and module,crankshaft position sensor, mapp sensor, iac, throttle position sensors check the connection at the crankshaft pos sensor... did the car do this befor you started working on it

Question about Buick LeSabre

1 Answer

crankshaft sensor is at the bottom of the engine, the camshaft is right by the water inlet. It is held in by 1 or 2 bolts. the camshaft sensor is not too hard to replace, it's tight but it can be done

...and dies. It will not restart until the engine has cooled down. I had a code for the Cam positioning sensor so i replaced the sensor and this still didnt help. replace the crankshaft position

Question about Buick LeSabre

2 Answers

...?€¢ The crankshaft has been replaced. ?€¢ The crankshaft harmonic balancer has been replaced. ?€¢ The crankshaft position sensor has been replaced. Need to have a capable scan tool to do this

Not finding what you are looking for?
1991 Buick LeSabre Logo

438 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...