...REPLACED THREE. TWO FRONT AND 1 REAR. THEY WILL HUMM AND WHEN WHEEL IS TURNED JUST RIGHT IT MIGHT STOP. MY AZTEC WAS MANUFACTURED IN CANADA, THIS DOES NOT SEEM TO BE AN ISSUE WITH THOSE FROM
...REAR HUB BEARING REPLACED BUT STILL MAKING NOISE probably have another bad wheel bearing on the other side,,,,gm is bad with wheel bearing,,if you turn left and it gets louder that means your loading ...
Rear Wheel Bearing Repair; 2005 pontiac aztek how do I replace the rear wheel bearings on my AWD 2005 Pontiac Aztek. Remove the brake caliper Remove the disc, (rotor) Remove the 34mm nut on the axel ...
...from the back.They say it isn`t an exhaust problem I`ve replaced the muffler and tailpipe.It is still there.It does sound like an exhaust problem though. Have someone check your rear wheel ...
2004 Pontiac azteck all wheel drive disabled......replaced a rear bearing that was going bad, but AWD DISABLED LIGHT is still on... you must reset computer
I need a repair manual for a 2004 Pontiac Aztec I need to replace a rear wheel bearing Library, Ebay, or most auto parts stores.
...Rear Wheel Hub(s) one or both are going bad. Dealer cost is $500.00 part at Auto Zone is $129.00. Not to difficult to replace if you are some what mechaniclly knowledgable My 2001 Aztek has the AWD ...
...rear is right on the bearing assembly. The front you just follow the wire coming off of the hub. If you do have to replace this hub due to a sensor, don't get a cheap one to fix it. Those go out ...
rear i had the hub bearing replaced ,stoped the grinding and howelling,but still noise only when turning usually the front wheel bearing make noise when turning I had similar problem and replacing the
193 questions posted
Usually answered in minutes!
917 Questions
342 Questions
278 Questions
263 Questions
1 Questions