2002 Nissan Pathfinder "cluster light rear remove" Questions

cluster and in the rear of it you will see the bulbs replace them and the speedo and gauge should light up, this is as long as the other lights are working like the heater controls and radio,hope this

...cluster out you will see the bulbs on the rear, locate area of the bulb, remove the bulb and to make sure its the correct bulb shine a light through the hole of the bulb you removed and look at the ...

light cluster must be removed from the body. First, untuck and pull back the carpet on the inside of the boot where the broken light is. Carefully unplug the four-way connector from the light cluster.

...cluster back light went out remove the cluster(should be able to insert Small flat head screwdrivers into slots on plastic trim of cluster. Lower your steering wheel down and remove key. wait approx ...

light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless,

light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless,

light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless,

light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless,

...light cover. However the assembly did not come off. I could open it a little and it appeared to be bolted from the inside. I looked online but didn't find an answer. I had already gotten pulled over ...

...light bulb for 1999 Nissan Altima GXE? You will have to remove the cluster. Remove the trim around the dash in front of the cluster, remove the bolts holding the cluster in, then you can access the ...