2001 Nissan Sentra "turning headlights car" Questions

LOW BEAM HEADLIGHTS NOT WORKING Low beam headlights (both) wont turn on. DRL and High beam are fully operational. Fuses are good. (GE Nighthawk) lamps are less than one year old. What should be ...

I need to adjust the headlights on my 1996 Nissan Sentra. There are no screws around the front of the headlight to make the adjustments so there must be another way but I don't have an owners manual. ...

dashboard lights when i turn on the headlights none of the dash lights come on.The radio light goes out.There is also a dimmer switch for the instument cluster that is illiminated so iam asumeing it ...

i have a similar problem as soon as i turn my headlight on, fuse 38 blows which is a 10 amp...i know its a short. It kills my dash light and tail light...im thinking its a bad headlight switch...not ...

...car up the lights are fine. When I turn my headlights on the lights on my speedometer and dash go dim. I don't think it did that before. The lights have always been bright on the dash with the ...

My brake lights will not turn on when I have the headlights on but it will turn on when the headlights are off. How do I fix this? Your battery and/or your alternator is/are weak. Proceed to Pep ...

I have a 2006 Nissan Sentra 1.8 and it is not starting. I checked out my Check Engine light and it said my Cam Shaft positon sensor is bad. So I replaced it but I think I fried my starter trying to ...

My headight's wont turn on. My headight's wont turn on, but my parking light's are always on and wont turn off unless I disconnect the battery. please tell me why. sounds like you need a headlight ...

87 nissan pathfinder head lights thankyou for help with my fuel problem it was the fuel pump.now it my lights i get power to one side but not too other.check it with light tester and light is low when

Headlight out 97 Nissan Sentra Does the entire headlamp get replaced or just the bulb?? should just be the bulb. Open you hood and look on the back of the head light. should be wires going into the ...