Question about Ford Explorer Sport Trac
...rotors. Still have ABS light on and lose brake partically. If you have brake fade that is if you hold the brake pedal down and it slowly goes down to the floor you probably need a master ...
Question about Ford Explorer Sport Trac
...brakes are locking up and skidding. Ford Explorer. bad brakes, get the actual brakes serviced first(ABS 2nd) when ABS fails it fails over to standard brakes. none this old are good. 21 year. no ...
Brake/ABS brake issue on 2001 Sport Trac? When applying the brakes, car is slowing down and when it goes to sotp, the brake pedal goes down a bit more and pulls the car to the right. Brakes are good, ...
abs light on 2002 explorer sport trac brakes want to pulse at slow speed but when you reach speed abs light comes on look for recalls my ford windstar had one the abs system
troubleshooting abs brakes Why does ABS activate intermittently for no reason (good weather conditions)? abs sensor or sensors are bad
...brake it will quickly re-engage. Most folks - as well as myself - suspect the ABS system is activating when it shouldn't be. Any suggestions or help would be much appreciated. Yes,have the ABS ...
Question about Ford Explorer Sport Trac
brake cylinders are not binding, check the drive shaft joints, check the brake discs, if there is air in the system you may have to take to a brake repair shop as ABS brakes are hard to bleed by hand.
Question about Ford Explorer Sport Trac
...bleeder while pushing the caliper piston in.If not ,the old burnt fluid would be pushed into the ABS system ,not good.I would pull the ABS fuse and see how it acts. With the ABS disabled you
Question about Ford Explorer Sport Trac
...abs light is not on this happens about 80% of the time on easy stops, never on hard stops Wayne, I would start with the brake wheel sensors, most likely the front end- I would start ...
...ABS light on and I put new Front pads, rotors and calipers on. The rear I also put on new shoes and cyclinders. Yes I have plenty of brake fliud and No air in the lines. If it was a sensor why would ...
520 questions posted
Usually answered in minutes!
209 Questions
79 Questions
7 Questions
2 Questions
437 Questions