Question about Dodge Intrepid
...main shaft moved off mark while removing timing chain how do I adjust to not have any problems If you have a timeing chain you have timeing gears witch have marks on them .These marks need to line up ...
main and rod bearings and the camshaft bearings. Passages in the cylinder block feed oil to the hydraulic lifters and rocker shaft brackets which feeds the rocker arm pivots. It is necessary to remove
...main crank bearing that is worn out. I would sell the car this summer with a oil change performed using a couple pints of STP to stop the noise Google: "2.7L sludge" These engines were a nightmare ...
Question about Ford Cars & Trucks
...main bearing caps, remove the crankshaft, replace the rear main seal and reassemble. It's a 1966 engine...you should consider replacing the front timing chain with a roller chain as well as rod and ...
...main bearing cap split line. Remove the bolts, then remove the timing guides and tensioner. Remove the camshaft sprocket bolts, using a 7⁄8 in. (21mm) wrench to hold the camshaft. Then ...
Question about Dodge Intrepid
...main bearing, but only when the oil is hot. The timing cover has two ports, one at 7 and one at 8 o'clock. One is plugged the other is not. could the oil be leaking from there? The harmonic balance ...
main timing chain.now what my problem is,is that i can't get the back timing chain cover off.what i need is the procedure or schematics or a step by step.can you help me? HI you need to remove all the
...main bearing cap split line (90 degrees past TDC). Remove bolts, then remove the timing guides and tensioner. Remove the camshaft sprocket bolt, using a 7 / 8 in. (21mm) wrench to hold the camshaft. ...
...Remove the main bearing caps. Keep them in proper sequence. Remove the crankshaft. You will need new rod and main bearings to replace those already in the vehicle. You will need a new oil pan gasket ...
...Remove the main wiring harness from the upper engine front cover (6019) . Remove the eight upper engine front cover bolts and the upper engine front cover . Raise and support the vehicle. Remove the ...
1,163 questions posted
Usually answered in minutes!
1,166 Questions
867 Questions
924 Questions
627 Questions
548 Questions